THE NAME OF A STANDARD VICAR IMAGE FILE FROM WHOM COORDINATES WILL BE MEASURED.
SPECIFY IF THE GIVEN COORDIN IS LATLON OR LINESAMP.
(LINE,SAMPLE) VALUES INPUT IN PAIRS. UP TO 80 INPUT PAIRS. FOR EACH PAIR THE CORRESPONDING LAT,LON WILL BE COMPUTED AND PRINTED.
KEYWORD--OPTIONAL SPECIFIES DESIRED SOURCE OF C-MATRIX, ME-MATRIX, AND TARGET-TO-SPACECRAFT VECTOR (RS). VALID VALUES ARE: DAVI --DATA DETERMINED BY MERT DAVIES NAV --DATA DETERMINED BY PROGRAM NAV FARE --DATA DETERMINED BY PROGRAM FARENC NAV2 --DATA DETERMINED BY PROGRAM NAV2 NEAR --DATA DETERMINED BY PROGRAM NEARENC IF THIS KEYWORD IS NOT SPECIFIED, OR IF THE SPECIFIED SOURCE DOES NOT EXIST, THE NAVIGATION DATA WILL BE SELECTED FROM THE AVAILABLE SOURCES, IN THE FOLLOWING ORDER OF PRIORITY: (1) DAVI, (2) NAV, (3) FARE, (4) NAV2, (5) NEAR, (6) PREDICT OR FINAL SEDR.
AN OUTPUT NAME PARAMETER THAT RETURNS THE LATITUDES or line value FOR EACH INPUT POINT. If COORDTYPE=LINSAM then OUT_LAT is a latitude. If COORDTYPE=LATLON then OUT_LAT is a line number. THE VARIABLE GIVEN FOR OUT_LAT SHOULD BE OF TYPE REAL AND SHOULD HAVE A COUNT BIG ENOUGH TO HOLD ALL THE COORDINATES. THE MAXIMUM IS 80 COORDINATES. NOTE THAT THE INPUT COORDINATES ARE IN A SINGLE PARAMETER, COORDIN, AS PAIRS, WHILE THE OUTPUT COORDINATES ARE IN TWO SEPARATE PARAMETERS, OUT_LAT AND OUT_LON, WHICH ARE EACH HALF AS BIG. OUT_LAT IS OPTIONAL; IF NO VARIABLE IS GIVEN THEN THE VALUES ARE NOT RETURNED.
AN OUTPUT NAME PARAMETER THAT RETURNS THE LONGITUDES or sample values FOR EACH INPUT POINT. If COORDTYPE=LINSAM then OUT_LON is a longitude. If COORDTYPE=LATLON then OUT_LON is a sample number. THE VARIABLE GIVEN FOR OUT_LON SHOULD BE OF TYPE REAL AND SHOULD HAVE A COUNT BIG ENOUGH TO HOLD ALL THE COORDINATES. THE MAXIMUM IS 80 COORDINATES. NOTE THAT THE INPUT COORDINATES ARE IN A SINGLE PARAMETER, COORDIN, AS PAIRS, WHILE THE OUTPUT COORDINATES ARE IN TWO SEPARATE PARAMETERS, OUT_LAT AND OUT_LON, WHICH ARE EACH HALF AS BIG. OUT_LON IS OPTIONAL; IF NO VARIABLE IS GIVEN THEN THE VALUES ARE NOT RETURNED.
Ex: TARGET=GANYMEDE specifies that GANYMEDE is the target in the input image. The TARGET may be a planet, satellite, or asteroid. If defaulted, the target name is extracted from the VICAR label or determined by other TBD means. A complete list of valid target names is located in the ASCII file assigned the logical name (or environmental variable) BODY_IDS.
SPICEMODE=LOCAL specifies that SPICE data is to be retrieved from local SPICE kernels. SPICEMODE=REMOTE specifies that SPICE data is to be retrieved via the SPICE server. If SPICEMODE is defaulted, the logical name (or environmental variable) DEFAULTSPICE is used to determine whether LOCAL or REMOTE is used. Note that if SPICE data is not found in LOCAL or REMOTE mode, the other mode is attempted.
CKNAME is a four character string specifying the C-kernel to be used: CKNAME C KERNEL -------- ------------- DAVI MIPS_DAVI.CK NAV MIPS_NAV.CK FARE MIPS_FARENC.CK NAV2 MIPS_NAV2.CK NEAR MIPS_NEAR.CK AMOS MIPS_AMOS.CK NAIF the best NAIF kernel is used If defaulted, the kernels are searched in the above order.
CKID is an alternative way to specify the prefered C-kernel (see CKNAME
parameter):
CKID CKNAME C KERNEL
---- -------- -------------
M906 DAVI MIPS_DAVI.CK
M905 NAV MIPS_NAV.CK
M904 FARE MIPS_FARENC.CK
M903 NAV2 MIPS_NAV2.CK
M902 NEAR MIPS_NEAR.CK
M901 AMOS MIPS_AMOS.CK
varies NAIF there are a large number of these files
Ex: CKID=M901 specifies the four character ID which uniquely identifies the
C-kernel MIPS_AMOS.CK.
A complete list of the C-kernel IDs is located in the ASCII file assigned the
logical name (or environmental variable) KERNELDB.
If specified, CKID overrides the CKNAME parameter.
USERID is a three character string which identifies the user who created the
camera pointing.
Ex: USERID=HBM identifies Helen Mortensen as the creator of the camera
pointing.
GROUPID is a three character string which identifies the group which created the camera pointing. Ex: GROUPID=040 identifies group 040 as the creator of the camera pointing.
INSTITUTE is a four character string identifying the facility which created the camera pointing. Ex: INSTITUTE=MIPS specifies that MIPS created the camera pointing.
PURPOSE is a four character string identifying the purpose of the observation or the purpose of processing. For example, PURPOSE=MOSA identifies the image as part of a mosaic sequence PURPOSE=COLO identifies the image as part of a color sequence
PROGRAM is the first six characters of the program creating the camera pointing. Ex: PROGRAM=FARENC specifies that FARENC created the camera pointing.
SPKID specifies the four character ID which uniquely identifies the SP kernel used to create the camera pointing. The SP-kernel IDs are located in the ASCII file assigned the logical name (or environmental variable) KERNELDB. Ex: SPKID=N015 specifies the SP kernel GLL_LONG_2.BSP
REQUNUM is a four character string identifying the IPL request number for which the camera pointing was created. Ex: REQNUM=3456 identifies (somewhat) request number R123456
Date and time the camera pointing was created in the form 'YEARMMDDHHMM'.
Ex: CDATE=199602291200 specifies that the pointing was created at noon
on February 29, 1996.