Three input images in the order: 1. Chromaticity coordinate x. 2. Chromaticity coordinate y. 3. Tristimulus coordinate Y. These images are in device independent coordinates.
Three Output RGB images in the order: 1. Red dn value in BYTE format. 2. Green dn value in BYTE format. 3. Blue dn value in BYTE format. These images are in DEVICE calibrated coordinates.
Target device name upon which the output RGB images are to be
displayed.
VALID=("mda","fujix","alps","temblor","wasatch","kodak168", "kodak230","asutek","codonics","csi_1","ntsc","hdtv","octane", "none") DEFAULT="none"
Defaults to none.
Path name for the location of color calibration files for the DEVICE. Defaults to /usr/local/share/calibration/ Note the ending slash !
Whether the monitor is the left or the right one.
Specify left or right. Defaults to none.
Only used if the device is a TV monitor.
VALID=("left","right","none") DEFAULT="none"
The nearest number of points in the color space to use for each least squares fit mapping rgb dn values to Luv color coordinates. Defaults to an internal table which is device dependent. At the moment all devices use 8 points. More points produces steadier colors but they are less accurate.
Print the Macbeth dn values for this device. No input files are needed. The output r g b files will contain a tiny picture six samples by four lines containing the Macbeth color chart where each patch is a single pixel. You can zoom it up to see it.