Help for TIMSCONV
PURPOSE:
TIMSCONV is a program which converts TIMS data from radiance to temperature,
or vice versa. The input must be a 3-D file of all 6 bands, and the
output will also be a 3-D file of all 6 bands, though the user may choose
the output format (byte, half, full, or real).
EXECUTION:
The following is the execution statement format for TIMSCONV:
TIMSCONV INP=PIX OUT=CALPIX PARAMS
where INP, OUT, and PARAMS are parameters discussed in their res-
pective parameter sections.
WRITTEN BY: Ron Alley April, 1991
COGNIZANT PROGRAMMER: Ron Alley
REVISION: 1.0 Conversion to remove central wavelengths July, 1996
PARAMETERS:
INP
TIMS radiance or temperature
image.
OUT
TIMS temperature or radiance
image; opposite of INP
SIZE
The standard VICAR output size
field.
SL
Starting line
SS
Starting sample
NL
Number of lines
NS
Number of samples
MODE
Conversion is to these units
Valid: TEMP, RAD
TEMPFAC
Rescaling factor to get image
data into degrees Celsius
RADFAC
Rescaling factor to get
image data into
milliwatts/(m*m*sr*micrometer)
FORMAT
Output data format
Default is same as input format
Valid: BYTE, HALF, FULL, REAL
EMIT
The emittance assumed for
each band.
DATE
Date of data acquisition. Used
to override the date in the
VICAR label (yymmdd)
See Examples:
Cognizant Programmer: