VICARIO test procedures

Decodes the synthetic BYTE image written in each band organization (BSQ, BIL, BIP). Passes when all three decode to the same 48 x 64 x 3 BYTE image (identical pixel hashes).

Run details · Source

Converts the synthetic BYTE BSQ image to VICAR with jConvertIIO. Passes when the output label keeps FORMAT='BYTE' and the output pixels are identical to the input.

Run details · Source

Converts the synthetic BYTE BIL image to VICAR with jConvertIIO. Passes when the output label keeps FORMAT='BYTE' and the output pixels are identical to the input.

Run details · Source

Converts the synthetic BYTE BIP image to VICAR with jConvertIIO. Passes when the output label keeps FORMAT='BYTE' and the output pixels are identical to the input.

Run details · Source

Decodes the synthetic HALF image written in each band organization (BSQ, BIL, BIP). Passes when all three decode to the same 48 x 64 x 3 SHORT image (identical pixel hashes).

Run details · Source

Converts the synthetic HALF BSQ image to VICAR with jConvertIIO. Passes when the output label keeps FORMAT='HALF' and the output pixels are identical to the input.

Run details · Source

Converts the synthetic HALF BIL image to VICAR with jConvertIIO. Passes when the output label keeps FORMAT='HALF' and the output pixels are identical to the input.

Run details · Source

Converts the synthetic HALF BIP image to VICAR with jConvertIIO. Passes when the output label keeps FORMAT='HALF' and the output pixels are identical to the input.

Run details · Source

Decodes the synthetic FULL image written in each band organization (BSQ, BIL, BIP). Passes when all three decode to the same 48 x 64 x 3 INT image (identical pixel hashes).

Run details · Source

Converts the synthetic FULL BSQ image to VICAR with jConvertIIO. Passes when the output label keeps FORMAT='FULL' and the output pixels are identical to the input.

Run details · Source

Converts the synthetic FULL BIL image to VICAR with jConvertIIO. Passes when the output label keeps FORMAT='FULL' and the output pixels are identical to the input.

Run details · Source

Converts the synthetic FULL BIP image to VICAR with jConvertIIO. Passes when the output label keeps FORMAT='FULL' and the output pixels are identical to the input.

Run details · Source

Decodes the synthetic REAL image written in each band organization (BSQ, BIL, BIP). Passes when all three decode to the same 48 x 64 x 3 FLOAT image (identical pixel hashes).

Run details · Source

Converts the synthetic REAL BSQ image to VICAR with jConvertIIO. Passes when the output label keeps FORMAT='REAL' and the output pixels are identical to the input.

Run details · Source

Converts the synthetic REAL BIL image to VICAR with jConvertIIO. Passes when the output label keeps FORMAT='REAL' and the output pixels are identical to the input.

Run details · Source

Converts the synthetic REAL BIP image to VICAR with jConvertIIO. Passes when the output label keeps FORMAT='REAL' and the output pixels are identical to the input.

Run details · Source

Decodes the synthetic DOUB image written in each band organization (BSQ, BIL, BIP). Passes when all three decode to the same 48 x 64 x 3 DOUBLE image (identical pixel hashes).

Run details · Source

Converts the synthetic DOUB BSQ image to VICAR with jConvertIIO. Passes when the output label keeps FORMAT='DOUB' and the output pixels are identical to the input.

Run details · Source

Converts the synthetic DOUB BIL image to VICAR with jConvertIIO. Passes when the output label keeps FORMAT='DOUB' and the output pixels are identical to the input.

Run details · Source

Converts the synthetic DOUB BIP image to VICAR with jConvertIIO. Passes when the output label keeps FORMAT='DOUB' and the output pixels are identical to the input.

Run details · Source

Legacy shapes from tstjConvertIIO.csh (1 x 1024, 1024 x 1, REAL 100 x 100): converts gen_byte_ns1_nl1024.vic to VICAR and to PDS3. Passes when both outputs decode to exactly the input pixels.

Run details · Source

Legacy shapes from tstjConvertIIO.csh (1 x 1024, 1024 x 1, REAL 100 x 100): converts gen_byte_ns1024_nl1.vic to VICAR and to PDS3. Passes when both outputs decode to exactly the input pixels.

Run details · Source

Legacy shapes from tstjConvertIIO.csh (1 x 1024, 1024 x 1, REAL 100 x 100): converts gen_real_100x100.vic to VICAR and to PDS3. Passes when both outputs decode to exactly the input pixels.

Run details · Source

Converts the GDAL int16 fixture, written on a little-endian machine (INTFMT/REALFMT = LOW), to TIFF. Passes when the values read back are the ones stored in the file (1 to 24), so the bytes were swapped correctly.

Run details · Source

Converts the GDAL float32-bsq fixture, written on a little-endian machine (INTFMT/REALFMT = LOW), to TIFF. Passes when the values read back are the ones stored in the file (1 to 122.5), so the bytes were swapped correctly.

Run details · Source

Converts the GDAL little-endian float32 fixtures in BSQ, BIL and BIP order to TIFF. Passes when the three TIFFs have identical pixels.

Run details · Source

Reads the GDAL little-endian HALF fixture (values 1 to 24) through the Java ImageIO API rather than jConvertIIO, and compares it with the BYTE fixture holding the same values. Passes when the pixel hashes match.

Needs review (bug or intended?): REVIEW-1: VicarImageReader via the ImageIO API returns byte-swapped samples for INTFMT=LOW files (256, 512, ... instead of 1, 2, ...); jConvertIIO output is correct

Run details · Source

Reads the GDAL bigendian-int16 fixture, whose system label has DAT_TIM and BINC items written by GDAL. Passes when the file decodes.

Needs review (bug or intended?): REVIEW-2: VICAR reader rejects GDAL-written system labels: "DAT_TIM may only go in history label"

Run details · Source

Reads the GDAL bigendian-float32 fixture, whose system label has DAT_TIM and BINC items written by GDAL. Passes when the file decodes.

Needs review (bug or intended?): REVIEW-2: VICAR reader rejects GDAL-written system labels: "DAT_TIM may only go in history label"

Run details · Source

Reads the GDAL vax-float32 fixture, whose system label has DAT_TIM and BINC items written by GDAL. Passes when the file decodes.

Needs review (bug or intended?): REVIEW-2: VICAR reader rejects GDAL-written system labels: "DAT_TIM may only go in history label"

Run details · Source

Converts the GDAL little-endian DOUB (float64) and FULL (int32) fixtures to VICAR. Passes when each output holds the stored values 1 to 24.

Run details · Source

Reads the GDAL fixture whose image line carries a binary prefix. Passes when it decodes to its 1 x 1 BYTE image (the prefix is not part of the image).

Run details · Source

Converts a truncated VICAR file (the label promises more data than the file holds). Passes when jConvertIIO exits non-zero and writes no output.

Issue IDS-8497: fixed: jConvertIIO used to exit 0 after a read failure

Run details · Source

Imports the result of the JUnit test VicarLabelTest.test from the Maven build (target/surefire-reports). Passes when it passed in JUnit; a JUnit failure is shown with its message.

Run details · Source

Bookkeeping, not a product test: checks that the JUnit class jpl.mipl.io.vicar.VicarLabelTest is listed in a feature's junit: list in features.yml, so its results are grouped under that feature.

Run details · Source

Reads a public Cassini ISS image with a binary label header (NLB=1) and a 24-byte prefix on every line (NBB=24), then converts it to VICAR with RI=true (read as a RenderedImage). Passes when the pixels match the recorded golden hash and the output has the same pixels.

Run details · Source

Converts the Cassini ISS image to PDS3 with KEEP_LINE_PREFIX=true. Passes when the label declares LINE_PREFIX_BYTES = 24, the first 8 line prefixes are byte for byte those of the input, and the pixels are unchanged.

Run details · Source

Converts the Cassini ISS image to VICAR with KEEP_LINE_PREFIX=true. Passes when the output label has NBB=24 and the first 8 line prefixes match the input.

Needs review (bug or intended?): REVIEW-13: VICAR output drops the line prefixes (NBB=0) even with KEEP_LINE_PREFIX=true

Run details · Source

Converts the Cassini ISS image to VICAR with ADD_BINARY_HEADER=true. Passes when the output label has NLB=1, showing the binary header was written.

Needs review (bug or intended?): REVIEW-13: VICAR output has no binary header (NLB=0) even with ADD_BINARY_HEADER=true

Run details · Source

Converts the synthetic 3-band BYTE image to PDS3. Passes when the label is valid (PDS3 version, ^IMAGE pointer, an IMAGE object with the right LINES, LINE_SAMPLES and BANDS, no empty "" values) and the pixels are unchanged.

Run details · Source

Converts the synthetic image to PDS3 with EMBED_VICAR_LABEL=true. Passes when the PDS3 label is valid, the VICAR label (LBLSIZE=) is embedded in the file, and the pixels are unchanged.

Run details · Source

Converts the synthetic image to PDS3 with PDS_FILENAME_IN_LABEL=true. Passes when the output file name appears in the label.

Needs review (bug or intended?): REVIEW-9: the documented keyword PDS_FILENAME_IN_LABEL is parsed as PDS_FILENAME, so it is ignored

Run details · Source

Converts the synthetic image to PDS3 with PDS_LABEL_TYPE=ODL3. Passes when the label starts with ODL_VERSION_ID = ODL3 and is otherwise valid.

Run details · Source

Reads a public MSL Navcam EDR thumbnail, which carries both a PDS3 and a VICAR label, and converts it to VICAR. Passes when the pixels match the recorded golden hash and the VICAR output has the same pixels.

Run details · Source

Converts the same MSL thumbnail by giving jConvertIIO its detached .LBL label instead of the image file. Passes when the conversion succeeds.

Needs review (bug or intended?): REVIEW-7: PDSImageReader fails on the detached MSL label: "Error reading header: Negative size"

Run details · Source

Converts a PDS-labelled MSL image to PDS3 (FORMAT=pds) without a stylesheet, so the default PDS-to-PDS stylesheet is used. Passes when the conversion succeeds with a non-empty output; before the IDS-8497 fix it crashed and left an empty file.

Issue IDS-8497: fixed: the default PDS-to-PDS stylesheet name was empty (NullPointerException, empty .pds)

Run details · Source

Same conversion with XSL=CopyEverything.xsl given explicitly. Passes when the output label has an ^IMAGE pointer and the pixels are unchanged.

Issue IDS-8497: an explicit copy stylesheet gives the same result as the default

Run details · Source

Reads a full-size public MSL Navcam EDR and converts it to VICAR. Passes when the pixels match the recorded golden hash and the VICAR output has the same pixels.

Run details · Source

Reads a public MER Opportunity Navcam EDR, the public stand-in for the internal mer_file.vic of the legacy test. Passes when the pixels match the recorded golden hash.

Run details · Source

Reads a public Cassini ISS image directly and through its detached PDS3 label (.lbl, whose ^IMAGE points at the image). Passes when both match the recorded golden hash.

Run details · Source

Imports the result of the JUnit test PDS3ObjectNameTest.noImageObjectProducesEmptySystemLabel from the Maven build (target/surefire-reports). Passes when it passed in JUnit; a JUnit failure is shown with its message.

Run details · Source

Imports the result of the JUnit test PDS3ObjectNameTest.readsRflImageWithExplicitParam from the Maven build (target/surefire-reports). Passes when it passed in JUnit; a JUnit failure is shown with its message.

Run details · Source

Imports the result of the JUnit test PDS3ObjectNameTest.readsRflImageViaHeuristicWhenParamUnset from the Maven build (target/surefire-reports). Passes when it passed in JUnit; a JUnit failure is shown with its message.

Run details · Source

Imports the result of the JUnit test PDS3ObjectNameTest.readsStandardImageObject from the Maven build (target/surefire-reports). Passes when it passed in JUnit; a JUnit failure is shown with its message.

Run details · Source

Bookkeeping, not a product test: checks that the JUnit class jpl.mipl.io.vicar.PDS3ObjectNameTest is listed in a feature's junit: list in features.yml, so its results are grouped under that feature.

Run details · Source

Converts the synthetic image to PDS3 with XSL=- (the default stylesheet in the jar) and EMBED_VICAR_LABEL=true. Passes when the label is valid and the pixels are unchanged.

Run details · Source

The legacy normal.pds recipe from tstjConvertIIO.csh (XML=false, XSL=VicarToPDSmer1.xsl, EMBED_VICAR_LABEL=true) on the synthetic image. Passes when the PDS3 label is valid.

Run details · Source

Converts the synthetic image to PDS3 with each of the 23 VicarToPDS stylesheets in the jar, one step per stylesheet. Passes when every label is valid and every output has the input pixels.

Run details · Source

The legacy normal.pds recipe on real data: converts a public MER EDR to VICAR, then to PDS3 with VicarToPDSmer1.xsl. Passes when the label is valid for a 512 x 512 image and the pixels match the original EDR.

Run details · Source

Applies a VICAR-to-PDS stylesheet directly to a PDS-labelled MER EDR (the legacy mer_file.vic case in runAll.csh). Passes when the conversion succeeds, copying the input label with a warning; before the IDS-8497 fix it crashed.

Issue IDS-8497: fixed: a VICAR-to-PDS stylesheet on PDS-labelled input (the legacy mer_file.vic case) crashed; the input label is now copied with a warning

Run details · Source

Reads a public Mars 2020 Navcam thumbnail two ways: through its PDS4 XML label and directly through the label attached to the image. Passes when the PDS4 reader is used and both give identical pixels matching the recorded golden hash.

Run details · Source

Converts the Mars 2020 thumbnail to TIFF and to VICAR, giving jConvertIIO the PDS4 label as input. Passes when both outputs have the pixels the label decodes to.

Run details · Source

Runs jConvertIIO from a parent directory with a relative path to the PDS4 label. Passes when the data file is found next to the label and the TIFF has the expected pixels.

Run details · Source

Reads a full-size public Mars 2020 Navcam EDR through its PDS4 label and directly, then converts it to VICAR. Passes when all three decode to identical pixels matching the recorded golden hash.

Run details · Source

Exports a PDS4 character table (GDAL fixture: 22 fields, 5 records) to CSV with ExtractTableJPL -c. Passes when the CSV has a 22-column header including "Event Number" and every record's values equal the source table.

Run details · Source

Exports the same table to fixed-width text with ExtractTableJPL -w. Passes when there is a header plus 5 records and the first record's values equal the source.

Run details · Source

Runs ExtractTableJPL -c without -o. Passes when the table (header plus 5 records) is written to stdout.

Needs review (bug or intended?): REVIEW-15: ExtractTableJPL prints nothing (exit 0) when no output file is given, and --list-tables prints nothing

Run details · Source

Exports a PDS4 delimited (CSV) table (GDAL fixture) with ExtractTableJPL -c. Passes when the output has a header and records.

Needs review (bug or intended?): REVIEW-16: pds4-jparser needs a newer opencsv than the 5.5 pinned in pom.xml: NoSuchMethodError CSVParserBuilder.withKeepQuotations

Run details · Source

Exports the character table through jConvertIIO with PDS4_TABLE_OUPUT_FORMAT=csv (the keyword's spelling). Passes when the CSV has a header plus 5 records.

Needs review (bug or intended?): REVIEW-17: jConvertIIO never passes the label to the PDS4 table reader (the PDS4TableReadParam setup is commented out); "Cannot read label file", no output

Run details · Source

Converts the Cassini VIMS cube to VICAR. Passes when the output has the dimensions and data type given by the label's CORE_ITEMS (1 x 64 x 352, SHORT).

Needs review (bug or intended?): REVIEW-14: ISIS reader does not trim CORE_ITEMS values: NumberFormatException for " 352", then a NullPointerException (no image); jConvertIIO exits 0 with no output

Run details · Source

Converts the GDAL ISIS2 cube to VICAR. Passes when the output has the dimensions and data type given by the label's CORE_ITEMS (43 x 1 x 1, FLOAT).

Needs review (bug or intended?): REVIEW-14: ISIS reader does not trim CORE_ITEMS values: NumberFormatException for " 352", then a NullPointerException (no image); jConvertIIO exits 0 with no output

Run details · Source

Reads the public HorseHead.fits (astropy sample data) and converts it to VICAR and TIFF. jConvertIIO flips FITS rows into display order, so outputs are compared with the source by statistics and with each other by pixels. Passes when the source matches the recorded golden hash, both outputs have the source's size, type and statistics, and the two outputs are identical.

Note: jConvertIIO flips FITS (bottom-up rows) to top-down display order; the ImageIO reader returns storage order, so outputs are compared with each other and by statistics

Run details · Source

Reads a public Magellan F-BIDR (orbit 378, file 13) with the F-BIDR ImageIO reader. Passes when it decodes to a 1092 x 14672 BYTE image that is not blank and matches the recorded golden hash.

Run details · Source

Converts the same F-BIDR to VICAR with jConvertIIO. Passes when the output decodes with all 14672 lines.

Needs review (bug or intended?): REVIEW-18: F-BIDR read fails in jConvertIIO ("must be read from a stream allowing random access"): VicarInputFile only treats javax FileImageInputStream as random access, but the FAT jar's ImageIO returns imageio-ext FileImageInputStreamExtImpl; exits 0 with no output

Run details · Source

Converts the synthetic 3-band BYTE image with FORMAT=tif, one of the 29 format names and aliases in the legacy test. Passes when the output decodes to exactly the input pixels.

Run details · Source

Converts the synthetic 3-band BYTE image with FORMAT=tiff, one of the 29 format names and aliases in the legacy test. Passes when the output decodes to exactly the input pixels.

Run details · Source

Converts the synthetic 3-band BYTE image with FORMAT=TIF, one of the 29 format names and aliases in the legacy test. Passes when the output decodes to exactly the input pixels.

Run details · Source

Converts the synthetic 3-band BYTE image with FORMAT=TIFF, one of the 29 format names and aliases in the legacy test. Passes when the output decodes to exactly the input pixels.

Run details · Source

Converts the synthetic 3-band BYTE image with FORMAT=png, one of the 29 format names and aliases in the legacy test. Passes when the output decodes to exactly the input pixels.

Run details · Source

Converts the synthetic 3-band BYTE image with FORMAT=PNG, one of the 29 format names and aliases in the legacy test. Passes when the output decodes to exactly the input pixels.

Run details · Source

Converts the synthetic 3-band BYTE image with FORMAT=jpeg2000, one of the 29 format names and aliases in the legacy test. Passes when the output decodes to exactly the input pixels.

Run details · Source

Converts the synthetic 3-band BYTE image with FORMAT=JPEG2000, one of the 29 format names and aliases in the legacy test. Passes when the output decodes to exactly the input pixels.

Run details · Source

Converts the synthetic 3-band BYTE image with FORMAT=JPEG 2000, one of the 29 format names and aliases in the legacy test. Passes when the output decodes to exactly the input pixels.

Run details · Source

Converts the synthetic 3-band BYTE image with FORMAT=jpeg 2000, one of the 29 format names and aliases in the legacy test. Passes when the output decodes to exactly the input pixels.

Run details · Source

Converts the synthetic 3-band BYTE image with FORMAT=pds, one of the 29 format names and aliases in the legacy test. Passes when the output decodes to exactly the input pixels.

Run details · Source

Converts the synthetic 3-band BYTE image with FORMAT=vicar, one of the 29 format names and aliases in the legacy test. Passes when the output decodes to exactly the input pixels.

Run details · Source

Converts the synthetic 3-band BYTE image with FORMAT=jpg, one of the 29 format names and aliases in the legacy test. Passes when the output has the input's size and bands and its mean is within 2 DN of the input (JPEG is lossy).

Run details · Source

Converts the synthetic 3-band BYTE image with FORMAT=JPG, one of the 29 format names and aliases in the legacy test. Passes when the output has the input's size and bands and its mean is within 2 DN of the input (JPEG is lossy).

Run details · Source

Converts the synthetic 3-band BYTE image with FORMAT=jpeg, one of the 29 format names and aliases in the legacy test. Passes when the output has the input's size and bands and its mean is within 2 DN of the input (JPEG is lossy).

Run details · Source

Converts the synthetic 3-band BYTE image with FORMAT=JPEG, one of the 29 format names and aliases in the legacy test. Passes when the output has the input's size and bands and its mean is within 2 DN of the input (JPEG is lossy).

Run details · Source

Converts the synthetic 3-band BYTE image with FORMAT=raw, one of the 29 format names and aliases in the legacy test. Passes when the file holds exactly width x height x bands bytes.

Needs review (bug or intended?): REVIEW-3: RAW output is padded to 256 x 256 tiles unless OFORM is given

Run details · Source

Converts the synthetic 3-band BYTE image with FORMAT=RAW, one of the 29 format names and aliases in the legacy test. Passes when the file holds exactly width x height x bands bytes.

Needs review (bug or intended?): REVIEW-3: RAW output is padded to 256 x 256 tiles unless OFORM is given

Run details · Source

Converts the synthetic 3-band BYTE image with FORMAT=bmp, one of the 29 format names and aliases in the legacy test. Passes when the output decodes with the input's size and bands and its mean within 2 DN of the input.

Needs review (bug or intended?): REVIEW-4: BMP writer throws ArrayIndexOutOfBoundsException for 3-band input

Run details · Source

Converts the synthetic 3-band BYTE image with FORMAT=BMP, one of the 29 format names and aliases in the legacy test. Passes when the output decodes with the input's size and bands and its mean within 2 DN of the input.

Needs review (bug or intended?): REVIEW-4: BMP writer throws ArrayIndexOutOfBoundsException for 3-band input

Run details · Source

Converts the synthetic 3-band BYTE image with FORMAT=pnm, one of the 29 format names and aliases in the legacy test. Passes when the output decodes with the input's size and bands and its mean within 2 DN of the input.

Needs review (bug or intended?): REVIEW-4: PNM writer (jai-imageio) fails to initialise on JDK 17+

Run details · Source

Converts the synthetic 3-band BYTE image with FORMAT=PNM, one of the 29 format names and aliases in the legacy test. Passes when the output decodes with the input's size and bands and its mean within 2 DN of the input.

Needs review (bug or intended?): REVIEW-4: PNM writer (jai-imageio) fails to initialise on JDK 17+

Run details · Source

Converts the synthetic 3-band BYTE image with FORMAT=jfif, one of the 29 format names and aliases in the legacy test. Passes when the output decodes with the input's size and bands and its mean within 2 DN of the input.

Needs review (bug or intended?): REVIEW-19: no ImageIO writer for this format name, though the legacy tstjConvertIIO.csh lists it

Run details · Source

Converts the synthetic 3-band BYTE image with FORMAT=JFIF, one of the 29 format names and aliases in the legacy test. Passes when the output decodes with the input's size and bands and its mean within 2 DN of the input.

Needs review (bug or intended?): REVIEW-19: no ImageIO writer for this format name, though the legacy tstjConvertIIO.csh lists it

Run details · Source

Converts the synthetic 3-band BYTE image with FORMAT=jpeg-ls, one of the 29 format names and aliases in the legacy test. Passes when the output decodes with the input's size and bands and its mean within 2 DN of the input.

Needs review (bug or intended?): REVIEW-19: no ImageIO writer for this format name, though the legacy tstjConvertIIO.csh lists it

Run details · Source

Converts the synthetic 3-band BYTE image with FORMAT=JPEG-LS, one of the 29 format names and aliases in the legacy test. Passes when the output decodes with the input's size and bands and its mean within 2 DN of the input.

Needs review (bug or intended?): REVIEW-19: no ImageIO writer for this format name, though the legacy tstjConvertIIO.csh lists it

Run details · Source

Converts the synthetic 3-band BYTE image with FORMAT=jpeg-lossless, one of the 29 format names and aliases in the legacy test. Passes when the output decodes with the input's size and bands and its mean within 2 DN of the input.

Needs review (bug or intended?): REVIEW-19: no ImageIO writer for this format name, though the legacy tstjConvertIIO.csh lists it

Run details · Source

Converts the synthetic 3-band BYTE image with FORMAT=JPEG-LOSSLESS, one of the 29 format names and aliases in the legacy test. Passes when the output decodes with the input's size and bands and its mean within 2 DN of the input.

Needs review (bug or intended?): REVIEW-19: no ImageIO writer for this format name, though the legacy tstjConvertIIO.csh lists it

Run details · Source

Converts the synthetic 3-band BYTE image with FORMAT=isis, one of the 29 format names and aliases in the legacy test. Passes when the output decodes with the input's size and bands and its mean within 2 DN of the input.

Needs review (bug or intended?): REVIEW-19: no ImageIO writer for this format name, though the legacy tstjConvertIIO.csh lists it

Run details · Source

Converts the synthetic HALF image with FORMAT=tif, which can hold 16-bit data. Passes when the output decodes to exactly the input pixels.

Run details · Source

Converts the synthetic HALF image with FORMAT=png, which can hold 16-bit data. Passes when the output decodes to exactly the input pixels.

Run details · Source

Converts the synthetic HALF image with FORMAT=jpeg2000, which can hold 16-bit data. Passes when the output decodes to exactly the input pixels.

Run details · Source

Converts the synthetic HALF image with FORMAT=pds, which can hold 16-bit data. Passes when the output decodes to exactly the input pixels.

Run details · Source

Converts the synthetic HALF image with FORMAT=vicar, which can hold 16-bit data. Passes when the output decodes to exactly the input pixels.

Run details · Source

Converts the synthetic REAL image with FORMAT=tif, which can hold floating-point data. Passes when the output decodes to exactly the input pixels.

Run details · Source

Converts the synthetic REAL image with FORMAT=pds, which can hold floating-point data. Passes when the output decodes to exactly the input pixels.

Run details · Source

Converts the synthetic REAL image with FORMAT=vicar, which can hold floating-point data. Passes when the output decodes to exactly the input pixels.

Run details · Source

Converts a REAL (float) image to PNG without OFORM; PNG cannot hold floating-point data. Passes when jConvertIIO refuses with a non-zero exit code.

Run details · Source

Converts a HALF (16-bit) image to JPEG without OFORM; the JPEG writer cannot encode 16-bit data. Passes when jConvertIIO exits non-zero instead of leaving an empty file.

Issue IDS-8497: fixed: jConvertIIO used to exit 0 and leave an empty file when the writer could not encode the data type

Run details · Source

Converts the legacy REAL 100 x 100 image to PNG with OFORM=BYTE. Passes when the PNG is BYTE, stretched to the byte range (maximum at least 250) and not blank (standard deviation over 10).

Issue IDS-7610: float VICAR to PNG came out blank

Run details · Source

Converts the REAL image (values 0 to 74) to BYTE with RESCALE=false. Passes when the output values are exactly 0 to 74.

Run details · Source

Converts the synthetic HALF image to BYTE with the default rescaling. Passes when the output is BYTE and fills the byte range (maximum at least 250).

Run details · Source

Converts the synthetic BYTE image to HALF with RESCALE=false. Passes when the output is 16-bit with pixels equal to the input.

Run details · Source

Converts the synthetic BYTE image to REAL with RESCALE=false. Passes when the output is floating point with the input's minimum, maximum and mean.

Run details · Source

Converts the synthetic BYTE image to HALF with the default rescaling. Passes when the output keeps at least half the relative contrast (standard deviation over range) of the input.

Needs review (bug or intended?): REVIEW-6: OFORM=HALF with default RESCALE saturates byte input (mean 254.5, std 9.8; source std 56)

Run details · Source

Converts the synthetic HALF image with CLAMP=(10,100). Passes when the output values span exactly 10 to 100.

Run details · Source

Converts a public 12-bit MER Navcam EDR to an 8-bit PNG browse image with OFORM=BYTE. Passes when the PNG is a 512 x 512 BYTE image that is not blank.

Run details · Source

Cuts out SOURCE_REGION=(10,20,16,8) from the synthetic image. Passes when the output is 16 x 8 x 3 and its pixel hash equals the hash computed from the generator formula for exactly that region. The region is outlined on the source preview.

Run details · Source

Asks for a 20 x 20 region at (40,60) of the 48 x 64 image, which runs past both edges. Passes when the output is clipped to 8 x 4 with exactly those pixels, rather than an error.

Issue IDS-7560: EOF exception when the region is not fully inside the image

Run details · Source

Subsamples with SUBSAMPLING=(2,2,0,0) (x step, y step, x offset, y offset). Passes when the output size and pixel hash match the samples and lines the formula selects. The kept pixels are marked on the source preview.

Issue IDS-7098: subsampling factor did not work

Run details · Source

Subsamples with SUBSAMPLING=(3,2,1,1) (x step, y step, x offset, y offset). Passes when the output size and pixel hash match the samples and lines the formula selects. The kept pixels are marked on the source preview.

Issue IDS-7098: subsampling factor did not work

Run details · Source

Crops a gray image with CROP=(1,5,7,11), documented as (x, y, height, width). Passes when the output is 11 wide by 7 high with exactly those pixels.

Needs review (bug or intended?): REVIEW-11: CROP uses cropX for the y offset (jConvertIIO.java:4816) and reads the last two values as width,height although the help text says height,width; CROP to VICAR also fails (raster bounds)

Run details · Source

Scales the synthetic image with SCALE=(2,2,0,0). Passes when the output is 96 x 128 x 3 with the source's value range.

Run details · Source

Reads only some bands, with READ_BANDS=2 and with READ_BANDS=0,2. Passes when each output has exactly those bands, with the pixel hash computed for them.

Run details · Source

Reverses the bands with BANDS=2,1,0, then reverses the result again. Passes when the first output has the bands reversed and the second equals the original.

Run details · Source

Writes a single-band image to PNG with 2RGB=true and with 2RGB=false. Passes when the first PNG is RGB with the gray value in all three bands and the second is a gray PNG.

Run details · Source

Writes a 4-band image to PNG with WRITE_TRANSPARENCY=true. Passes when the PNG is RGBA and the fourth band is the alpha channel, pixel for pixel.

Run details · Source

Converts the synthetic image to PDS3 with XML=true, which writes the label DOM as XML debug files. Passes when at least one XML file is written and each is well formed (opens and closes its root element).

Run details · Source

Parses, with the TreeInfo tool, an XML document whose DOCTYPE points at a DTD that does not exist. Passes when there is no exception: the hardened parser never loads external DTDs.

Issue IDS-10406: before the fix this failed with FileNotFoundException for the DTD

Run details · Source

Parses a hostile XML document with external general and parameter entities: one reads a local "secret" file, another points at a missing file. Passes when the secret text never appears in the output and nothing tries to open the missing file.

Issue IDS-10406: XXE: external general and parameter entities must be ignored

Run details · Source

Imports the result of the JUnit test DOMutilsXXETest.externalParameterEntityIsNotResolved from the Maven build (target/surefire-reports). Passes when it passed in JUnit; a JUnit failure is shown with its message.

Run details · Source

Imports the result of the JUnit test DOMutilsXXETest.externalDtdIsNotLoaded from the Maven build (target/surefire-reports). Passes when it passed in JUnit; a JUnit failure is shown with its message.

Run details · Source

Imports the result of the JUnit test DOMutilsXXETest.factoryHasXXEFeaturesDisabled from the Maven build (target/surefire-reports). Passes when it passed in JUnit; a JUnit failure is shown with its message.

Run details · Source

Imports the result of the JUnit test DOMutilsXXETest.namespacedLabelStillParses from the Maven build (target/surefire-reports). Passes when it passed in JUnit; a JUnit failure is shown with its message.

Run details · Source

Imports the result of the JUnit test DOMutilsXXETest.externalGeneralEntityIsNotResolved from the Maven build (target/surefire-reports). Passes when it passed in JUnit; a JUnit failure is shown with its message.

Run details · Source

Bookkeeping, not a product test: checks that the JUnit class jpl.mipl.io.util.DOMutilsXXETest is listed in a feature's junit: list in features.yml, so its results are grouped under that feature.

Run details · Source

Runs a batch file of 3 conversions (PNG, TIFF and VICAR from different inputs) with ARGFILE. Passes when the run exits 0 and every output exists with its input's pixels.

Run details · Source

Runs a batch file of 3 conversions (PNG, TIFF and VICAR from different inputs) with ARGFILE and PARALLEL_BATCH=2. Passes when the run exits 0 and every output exists with its input's pixels.

Run details · Source

Converts an input file that has no extension to an output name with no extension. Passes when the output has the input pixels.

Issue IDS-10067: launchers failed on file names with no extension

Run details · Source

Converts to PNG with OUT=- and SILENT, which should stream the image to stdout. Passes when the exit code is 0 and stdout starts with the PNG signature.

Needs review (bug or intended?): REVIEW-12: OUT=- fails with IllegalArgumentException "image == null!" and writes nothing

Run details · Source

Converts an MSL Navcam thumbnail straight from its https URL on the public PDS Imaging Node. Passes when the result has the same pixels as the local copy.

Run details · Source

Legacy step 18, once checked by eye in JADE: converts the synthetic image to PNG, then the PNG to JPEG. Passes when the JPEG displays: BYTE, the same size as the PNG, not blank (standard deviation over 3), not black (mean over 2) and not saturated (mean under 253). The preview is attached for a person to look at.

Run details · Source

Makes an 8-bit PNG browse image (OFORM=BYTE) of msl-navcam-thumb-img, as a reviewer once viewed it in JADE. Passes when it displays: the source's size, BYTE, and not blank, black or saturated. The preview is attached.

Run details · Source

Makes an 8-bit PNG browse image (OFORM=BYTE) of m2020-navcam-thumb-img, as a reviewer once viewed it in JADE. Passes when it displays: the source's size, BYTE, and not blank, black or saturated. The preview is attached.

Run details · Source

Makes an 8-bit PNG browse image (OFORM=BYTE) of cassini-iss-img, as a reviewer once viewed it in JADE. Passes when it displays: the source's size, BYTE, and not blank, black or saturated. The preview is attached.

Run details · Source

Makes an 8-bit PNG browse image (OFORM=BYTE) of astropy-horsehead-fits, as a reviewer once viewed it in JADE. Passes when it displays: the source's size, BYTE, and not blank, black or saturated. The preview is attached.

Run details · Source

Makes an 8-bit PNG browse image (OFORM=BYTE) of mer1-navcam-edr, as a reviewer once viewed it in JADE. Passes when it displays: the source's size, BYTE, and not blank, black or saturated. The preview is attached.

Run details · Source

Makes an 8-bit PNG browse image (OFORM=BYTE) of msl-navcam-edr-img, as a reviewer once viewed it in JADE. Passes when it displays: the source's size, BYTE, and not blank, black or saturated. The preview is attached.

Run details · Source

Makes an 8-bit PNG browse image (OFORM=BYTE) of m2020-navcam-edr-img, as a reviewer once viewed it in JADE. Passes when it displays: the source's size, BYTE, and not blank, black or saturated. The preview is attached.

Run details · Source

Runs xml_swap.py in replace mode: replaces //pds:A in a target document with the element from a source document. Passes when the output has the new element, keeps the untouched sibling and no longer has the old value.

Run details · Source

Runs xml_swap.py --list-xpaths on a PDS4-namespaced document. Passes when it exits 0 and lists the pds:A element path.

Run details · Source

Runs xml_swap.py --show-xpath on a document with an external entity that would read a local "secret" file. Passes when the element is printed with the entity unexpanded (&xxe;) and the secret never appears.

Issue IDS-10407: lxml parser must not resolve entities or use the network

Run details · Source

Runs build_mesh_extras.py on a mesh .mtl file. Passes when the JSON it writes holds the solar longitude and the texture PNG list from the .mtl.

Run details · Source

Runs build_mesh_extras.py with four bad paths: an output outside its folders (../escaped.json), an output that is not .json, and /etc/hosts as the .mtl and as the base JSON. Passes when each run exits non-zero with a build_mesh_extras: error and writes nothing.

Issue S8707: SonarCloud pythonsecurity:S8707 path traversal via command-line arguments

Run details · Source

Generates a PDS4 label for a public Mars 2020 Navcam image with Labelocity (Velocity templates plus vicario). Passes when the label is complete XML with no unresolved template references, names the image file, has a urn:nasa:pds logical identifier, describes the image array exactly as the official archive label does, and reads back to the same pixels.

Run details · Source

Generates a PDS4 label for a public MSL Navcam image (MSL has no official PDS4 label to compare with). Passes when the label is valid as above, describes a 64 x 64 array and reads back to the image's pixels.

Run details · Source

Checks features.yml: feature ids are unique, lowercase and not reserved, and every feature has a name, a description and a valid status.

Run details · Source

Checks that every active feature lists spec files that exist and call feature() with its id, so their tests carry the feature's tag.

Run details · Source

Checks that planned features name a milestone and excluded features give a reason.

Run details · Source

Checks that every spec file in features/ is listed under a feature in features.yml.

Run details · Source

Checks the test data manifest: every downloaded file is pinned by SHA-256, has a license and is used by a spec or helper.

Run details · Source

Lists the whole suite (playwright test --list) and checks that every test has a "what it checks" description and at least one scope tag (@nominal, @off-nominal, @malformed-input, @lossless, @mission-data, @regression, @security, @legacy, @suite, @unit), so the procedures report describes every test.

Run details · Source